Manual Corona spray gun PEM-C3
Electrostatic coating with the PEM-C3 is marked by excellent charging of the powder and an extremely high transfer efficiency.

Contact Us

Tribo spray gun PEM-T3
The powder particles are reliably charged up by friction against the PTFE inner walls and chicanes of the powder duct. This charging system is ideally suited for coating inside Faraday cages!

Contact Us

Corona Cup Cun PEM-CG3
Ideal for all users who only want to apply small quantities of coating powder!

Contact Us

Tribo Cup Cun PEM-TG3
Ideal for all users who only want to apply small quantities of coating powder!
The powder particles are reliably charged up by friction against the PTFE inner walls and chicanes of the powder duct. This charging system is ideally suited for coating inside Faraday cages.

Contact Us

Airmatic spray gun PEA-C3
The Airmatic PEA-C3 gun provides an extremely high application efficiency and excellent charging of the powder. The integral high voltage cascade with a power rating of up to 100 kV works perfectly and safely. All electronic components are integrated in the robust plastic body of the gun. This means low servicing costs and a long life.

Contact Us

Airmatic spray gun PEA-C3A
This angled gun has been developed for special coating tasks. The powder is sprayed at a 90° angle. It is ideal for coating difficult to reach work pieces such as e.g. radiators or aluminum rims in horizontal coating. Thanks to its short construction, problem zones can also be reliably coated from above or below. The nozzle system is compatible with the PEA-C3 automatic gun.

Contact Us

Tribo spray gun PEA-T3
The Wagner Tribo spray system has been developed in accordance with the latest technological ideas and application techniques and provides perfect surfaces especially when coating parts with the most difficult geometry.
 
The powder particles are charged on the PTFE inner walls and chicanes and thus achieve a particularly high charge. This makes it possible to obtain brilliant coatings even on particularly complex work-pieces with under-cuts and recesses. And what’s more: Faraday cages do not occur with this charging system! The following is true for all wear parts: A long service life that reduces the operating costs - and, thanks to the service-friendly design, quick simple cleaning is possible.

Contact Us

Airmatic Twin Gun
The Airmatic twin gun meets the extremely high demands for a perfect surface finish.

Mounted on an articulating arm robot the twin gun follows the geometry of the work-piece precisely and completely automatically. The high voltage cascade integrated into each gun works perfectly and is absolutely reliable. Also integral is the well proven Corona-Star which provides a perfect penetration power and a incomparable finish.

Contact Us

Powder bell PER-C1
When it comes to economy and the degree of automation, the PER-C1 powder bell achieves great success, especially in the coating of large area components.
 
The powder is charged electrostatically and atomized by means of a rotational atomizer. At speeds of up to 10,000 r.p.m. a particularly high efficiency of application is achieved and thus an extraordinarily uniform distribution of the film thickness.

Contact Us